DIY Wind Generator – How To Get Rid Of Excess Power

November 15, 2011 by Paul Robertson  
Filed under Business

Many folks are unsurprisingly interested in the suggestion of tapping into free wind power by building a DIY wind generator. Before getting started with such a project it is worthwhile taking some time to learn the basic concepts of wind power before making up your mind about building a wind generator. It can be somewhat involved to run your appliances off the harvested electricity but the building of a generator is relatively easy.

Some individuals will likely find the wind power notion more attractive than the solar power alternative because windmill construction is quite straightforward. This could be due to the fact that windmills have been used for making flour and moving water for a very long time. Solar technology, on the other hand, is comparatively recent and uses a lot of obscure terms and materials.

The principal challenge with using air currents for home electricity, such as with a DIY wind generator, is that the air is irregular. The electricity produced can be stored in batteries just like solar energy, but when batteries are full they will burn out if the extra power is not diverted. A very windy day can push a lot of air through your system and might just make too much of a good thing.

This explains why the traditional windmill use of pumping H2O is comparatively easy – any excess water just flows away downstream. The blades can keep on turning and making the pump run and too much power and water is not a factor.

However, if you are using a DIY wind generator to create and store power, things get a bit more complicated. Installing switches for programmed operation of appliances is one beneficial way to plan ahead if you produce extra power that you can’t use. It is possible to establish the system so that a Telly or something similar will switch on, so that any further power coming into the batteries will go to that appliance. Instead, you can use a switch that automatically disconnects the generator from the batteries once they are entirely charged. Once the batteries have been automatically disconnected, the windmill blades can keep spinning around without causing any harm.

The point is not that it is impossible to use windy days to power your home, but that there is more to it than you may recognize. The most beneficial way to deal with this issue is to sell your unwanted power back to the power company. For the modest inconvenience of staying joined to the power grid, you will be able to create some spare income.

If you need some extra information on making a plan to get rid of spare power, you can simply find it on-line. The issue of extra power is one that can be simply dealt with if you are committed to making your own alternative energy and saving a bit of cash. When you take into account that you will be using electricity for many years to come, you will see that the slight effort of building a wind turbine will be repaid many times over.

You will definitely find that a DIY wind generator will provide a significant measure of your energy needs if you design it to suit your family’s requirements.

Before you purchase any plans for creating a DIY wind generator, make sure you grab a copy of Paul Robertson’s excellent FREE Report On DIY Energy Options, plus a load of other money-saving ideas.

categories:

DIY Wind Power – A Great Way To Save A Lot Of Money

November 13, 2011 by Paul Robertson  
Filed under Business

If you are searching for an environmentally friendly way of cutting back on your energy bills, the DIY wind power presents as a highly worthwhile option. Constructing your own windmill can be a low-cost and simple project if you want to make important savings in energy expenditure. Basically, a wind turbine, or generator, is a system composed of fan blades attached to a hub, which turn a gear shaft that turns a generator that produces an electric charge.

The stored electrical energy can then be converted to alternating current suitable for home appliances. You can even draw directly from the storage batteries, or sell the stored energy back to the utility company. It is a good idea to use grid power as a backup system if the wind speeds in your area are temporarily too low to produce enough power.

It will likely cost you a few hundred dollars to build a DIY wind power turbine, and this may seem like quite a lot. Nevertheless over the life of your windmill you will save many times this amount by making your electricity. Many homeowners, especially those with farms or large open spaces on their properties, have seen huge savings and even profits with their own turbines.

Finding a good guide on how to build your own wind turbine is the key foundation to your diy project. You can very easily find good quality guides on the internet that will take you through the necessary step for creating your own generator. When you are comparing guides, make sure you get one that is easy to read and contains comprehensive constructions. The guide should tell you what you need to buy and how to assemble the parts, as well as give tips on location and tying it in to your home’s electrical system.

It is important to find a good location for your DIY wind power generator. You want it to be in an open space without blockages. For example, if you build it on its own tower, make sure it is a reasonable distance from the house. See if you can discover any guides on local wind directions and speeds to help you find the best location for your windmill

Once you have found the right location, you are ready to acquire the parts and assemble the turbine. Have a look at online auction sites and specialised turbine stores – these can be really good for getting good materials at an affordable price. Make sure that you have all of the parts before you begin, and consult your guide regularly.

When you have finished assembling your DIY wind power turbine, it can be placed on a tower or pole in the ideal location. You then run a power line to the house – the best place to connect is where the standard grid connection is. Using the appropriate gauge and type of wire is very important when you are doing the electrics.

The final step is to connect it to your home’s electrical system, and to batteries should you wish to store electricity. When undertaking this step, it is a good idea to use an electrician unless you are experienced with such systems and the best way to connect them. Make sure your electricity is turned off at the meter when you connect your turbine to your home’s electrical system.

You can clearly see that DIY wind power is a fantastic way to save a lot of money. Building your own turbine can be inexpensive and undemanding. Harnessing the wind can yield savings and even profits that more than make up for the upfront cost of constructing and installing your own DIY wind power turbine.

Before you make a decision on which DIY Wind Power project to make, make sure you have a look at Paul Robertson’s FREE Report on DIY Energy Options plus other money saving secrets for your home.

categories: