DIY Solar Energy Panels

November 28, 2011 by CJ Woods  
Filed under Product Reviews

You need power, and you want it right now! Watts and Watts of electricity, kilowatts per hour of electricity. Yet the power company keeps raising up your charges, making your power bill far more oppressive than a mid-west summer day just before a thunderstorm lets go of more than enough power to light up a city. Where did that thunderstorm pick up it’s power? It’s all Solar energy, naturally. Utilizing a solar panel array, some batteries, and diodes together with switches, you’re sure you can have all of the electricity you require! Solar power is free, alternative, and readily available essentially all over the world, once you’ve got the equipment that can convert it to electricity. Exactly what does it take to produce solar power? At the center of any solar energy power system is the solar cell. Cells may be found in various types. A solar cell is a silicon semiconductor, typically square or rectangular and is also available in different dimensions to support many purposes, from little calculator cells, to big cells arranged in arrays that power people’s homes and buildings. Any time sunlight hits the surface area, an electric current is generated.

How many Watts?

To start with, it’s wise to figure out how much electricity you need to produce. The easiest method to figure out how much power you need is by calculating Watts. Lights plus home appliances are typically rated by how many Watts they use. For instance, to produce the electrical power you need for that ac unit you installed during last summer’s massive heat wave, you have to know how many Watts it needs. A little air conditioner needs approximately five hundred Watts; medium and big units will use 1000-1500 Watts or more. By adding up the number of Watts you use hourly, you’re able to work out your current consumption. How can you be sure the number of Watts you will need for your whole house? Simple, look at your power bill, or simply telephone the electricity provider and figure out the total number of kilowatt hours (kWh, 1000 Watts per hour) you will normally use every month. An appliance which uses 1000 Watts, left on for one hour, will use 1 kWh. The average cost of one kWh can vary from about 8 and 20 cents in the United States. Generally cells utilized for home arrays are 4, five or even 6 in., and produce approximately two watts of power, under ideal (direct sunlight, warm temperature) conditions. Cells are usually mounted on frames of wood or metal in sets of 18, 36, or 72, putting out thirty six, 72 and 144 Watts (at two Watts per cell) respectively. A seventy two cell module lists for around $500-700. For Do It Yourself solar power systems, you save much more cash by purchasing the solar cells and making the panels yourself. What does it take to make a panel your self?

Do It Yourself How to construct Solar Power Panels at Home

Building solar panels at home hasn’t ever been so easy. Cells are sold online for around $1 each, frequently with other parts included. A package deal of seventy two cells, plus a diode, that keeps the electricity flowing in only one direction, and wire for connecting it all up is available for $100 or less! If you also purchase a frame for $40, you will save a lot of money compared to $500- 700 for each built module. That’s a possible cost savings of $360-560 per module! Pretty much all you will need for making your own personal solar panels at home is just a bit of know-how, some basic tools, and good instructions. Take a look at this article’s resource link to see a comparison graph and report on do-it-yourself solar panel manuals. The manuals offer a thorough overview of the fundamentals of a pv system, from the solar cells, to the electrical wiring and framework, to inverters and battery packs, and much more. How much are you able to actually save on your electricity bills?

Saving Money on Your Energy Bill

It’s easy to start small and increase your system while you learn, but will it genuinely save you money? The answer is yes, and no. Sure your electricity bill will get reduced while you increase the solar power capacity to your system, but you have to think about how much power it is possible to purchase with the money you spend on components. Going solar is an investment, therefore it will take time to make back the upfront cash you invest. Things to consider are the cost of the tools and materials, and your time and energy when compared to the amount of money you can save with regards to your power bill in time. Just as important, however, is definitely the satisfaction of owning a solar pv system that you set up yourself, and the enjoyment of cutting open your electricity bill and seeing it get lower and lower. You could possibly even be allowed to sell power back to the power company and get a check instead of owing them! Keep in mind however, if you’ve built the system yourself, the power company may not let you sell power back for safety, because most diy home owners aren’t accredited electricians, and the system is not UL listed. Consult your nearby utility company for regulations. The fulfillment you will enjoy from listening to your air conditioner kick on, as you settle back and take it easy guilt free, realizing that you won’t owe the electricity company a cent for the electricity, is probably the most satisfying reason of all to make your very own solar energy system.

DIY Green Power DIY Solar Panels Homemade Solar Panels DIY Green Power, Solar Panels

categories:

DIY Wind Generator – How To Get Rid Of Excess Power

November 15, 2011 by Paul Robertson  
Filed under Business

Many folks are unsurprisingly interested in the suggestion of tapping into free wind power by building a DIY wind generator. Before getting started with such a project it is worthwhile taking some time to learn the basic concepts of wind power before making up your mind about building a wind generator. It can be somewhat involved to run your appliances off the harvested electricity but the building of a generator is relatively easy.

Some individuals will likely find the wind power notion more attractive than the solar power alternative because windmill construction is quite straightforward. This could be due to the fact that windmills have been used for making flour and moving water for a very long time. Solar technology, on the other hand, is comparatively recent and uses a lot of obscure terms and materials.

The principal challenge with using air currents for home electricity, such as with a DIY wind generator, is that the air is irregular. The electricity produced can be stored in batteries just like solar energy, but when batteries are full they will burn out if the extra power is not diverted. A very windy day can push a lot of air through your system and might just make too much of a good thing.

This explains why the traditional windmill use of pumping H2O is comparatively easy – any excess water just flows away downstream. The blades can keep on turning and making the pump run and too much power and water is not a factor.

However, if you are using a DIY wind generator to create and store power, things get a bit more complicated. Installing switches for programmed operation of appliances is one beneficial way to plan ahead if you produce extra power that you can’t use. It is possible to establish the system so that a Telly or something similar will switch on, so that any further power coming into the batteries will go to that appliance. Instead, you can use a switch that automatically disconnects the generator from the batteries once they are entirely charged. Once the batteries have been automatically disconnected, the windmill blades can keep spinning around without causing any harm.

The point is not that it is impossible to use windy days to power your home, but that there is more to it than you may recognize. The most beneficial way to deal with this issue is to sell your unwanted power back to the power company. For the modest inconvenience of staying joined to the power grid, you will be able to create some spare income.

If you need some extra information on making a plan to get rid of spare power, you can simply find it on-line. The issue of extra power is one that can be simply dealt with if you are committed to making your own alternative energy and saving a bit of cash. When you take into account that you will be using electricity for many years to come, you will see that the slight effort of building a wind turbine will be repaid many times over.

You will definitely find that a DIY wind generator will provide a significant measure of your energy needs if you design it to suit your family’s requirements.

Before you purchase any plans for creating a DIY wind generator, make sure you grab a copy of Paul Robertson’s excellent FREE Report On DIY Energy Options, plus a load of other money-saving ideas.

categories:

DIY Wind Power – A Great Way To Save A Lot Of Money

November 13, 2011 by Paul Robertson  
Filed under Business

If you are searching for an environmentally friendly way of cutting back on your energy bills, the DIY wind power presents as a highly worthwhile option. Constructing your own windmill can be a low-cost and simple project if you want to make important savings in energy expenditure. Basically, a wind turbine, or generator, is a system composed of fan blades attached to a hub, which turn a gear shaft that turns a generator that produces an electric charge.

The stored electrical energy can then be converted to alternating current suitable for home appliances. You can even draw directly from the storage batteries, or sell the stored energy back to the utility company. It is a good idea to use grid power as a backup system if the wind speeds in your area are temporarily too low to produce enough power.

It will likely cost you a few hundred dollars to build a DIY wind power turbine, and this may seem like quite a lot. Nevertheless over the life of your windmill you will save many times this amount by making your electricity. Many homeowners, especially those with farms or large open spaces on their properties, have seen huge savings and even profits with their own turbines.

Finding a good guide on how to build your own wind turbine is the key foundation to your diy project. You can very easily find good quality guides on the internet that will take you through the necessary step for creating your own generator. When you are comparing guides, make sure you get one that is easy to read and contains comprehensive constructions. The guide should tell you what you need to buy and how to assemble the parts, as well as give tips on location and tying it in to your home’s electrical system.

It is important to find a good location for your DIY wind power generator. You want it to be in an open space without blockages. For example, if you build it on its own tower, make sure it is a reasonable distance from the house. See if you can discover any guides on local wind directions and speeds to help you find the best location for your windmill

Once you have found the right location, you are ready to acquire the parts and assemble the turbine. Have a look at online auction sites and specialised turbine stores – these can be really good for getting good materials at an affordable price. Make sure that you have all of the parts before you begin, and consult your guide regularly.

When you have finished assembling your DIY wind power turbine, it can be placed on a tower or pole in the ideal location. You then run a power line to the house – the best place to connect is where the standard grid connection is. Using the appropriate gauge and type of wire is very important when you are doing the electrics.

The final step is to connect it to your home’s electrical system, and to batteries should you wish to store electricity. When undertaking this step, it is a good idea to use an electrician unless you are experienced with such systems and the best way to connect them. Make sure your electricity is turned off at the meter when you connect your turbine to your home’s electrical system.

You can clearly see that DIY wind power is a fantastic way to save a lot of money. Building your own turbine can be inexpensive and undemanding. Harnessing the wind can yield savings and even profits that more than make up for the upfront cost of constructing and installing your own DIY wind power turbine.

Before you make a decision on which DIY Wind Power project to make, make sure you have a look at Paul Robertson’s FREE Report on DIY Energy Options plus other money saving secrets for your home.

categories: