Homemade energy – The need of the Hour

December 20, 2011 by Bryan Adam  
Filed under Business

Excessive use of electricity to run all home appliances, is a waste of energy. Electricity, supplied to our homes, is produced through thermal generation, from fossil fuels, hence these are exhaustible. Frequent power cuts to save energy for future use have become very common. It is time that one tries to use more homemade energy sources to run the appliances.

Awareness about lack of fossil fuels has increased among the public and hence has become the need of the hour to invent useful methods of producing homemade energy. The solar power and wind power can be utilized completely to create energy. There are some systems developed by people, which makes it easy to develop energy at home. Some people can even cut down their electricity bill to nil and some supply electricity back to the grid.

The solar energy can be harvested by means of solar panels. Solar panels bought from outside can be very costly, hence one can make a solar panel at home. It is a very simple procedure, which is available on the net. Small solar chips are available on the net at dirt cheap rates, and hence can be purchased very easily. The solar energy can be stored in a battery backup and can be then used to heat up the water and for other purposes.

In areas where there is high wind velocity, a community or a group of people can take on the installation charges of a wind mill and establish one. The establishment of a wind mill can be done at home too, by placing a wind vane at home and then directing the win into a small turbine which produces electricity.

It is necessary to take the necessary steps towards creating better sources of homemade energy , so that the future generation has enough power to survive on.

Tom Lee has been energy writer for the past 10 years. He’s also an accredited researcher on the subject for leading research institutes in the US.Bill Ford’s home made energy scam ,however, is probably the only DIY project that I did right from the start up to the finish line.homemade energy saves you as much as $1000 per year on your electricity bill.

categories:

Think Outside The Box For Smaller Energy Bills

December 18, 2011 by Lonrna Davis  
Filed under Business

As electricity prices spiral way out of control we’re all searching for methods to help reduce our power consumption. The bad news is that with oil prices bumping $100 a barrel the rising trend in electricity costs is most likely going to get worse not better. Almost all of the easy systems of reducing the amount of electricity you use on a day by day basis you have possibly already implemented.

Strategies like replacing bulbs in your home with low-energy ones and switching off new appliances for example are both cheap and simple to effect however there is a lot more that can be done if you're ready to spend a little cash now for Energy Savings Products.

The following methods though not advanced science or dear to carry out will in the long term help you to cut the amount of electricity you consume although break even point won't be realized for about a year.

Electricity Consumption Monitors. For roughly $40 you can purchase a gadget which consistently monitors the amount of electricity you are using at any particular time. These devices typically come in two parts both powered by batteries. The 1st part is a sender unit that is attached to one of the cables leaving your electricity meter and it measures the power being employed by all of the electric devices in your house and sends the results to a receiver unit. The second part is a receiver unit that is mounted in an outstanding position in your home where it can be easily viewed.

It has a large LCD display which shows in Kilowatts how much electricity you are using right now. After a couple of weeks of normal usage you'll get an understanding of what's the standard base rate of power you are using on a typical day. For my home it’s about 0.3 – 0.6 KW. If on passing the unit I see a reading of 2 Kilowatts or even more I know something that is drawing lots of power has been left switched on. Frequently it seems the oven or microwave is the culprit and as it’s my dinner that is being cooked it can be ignored.

Occasionally though it turns out something has been left switched on by mistake and more frequently than not it is the water heater. Now a hot water heater will draw 2 KW of power plus and leaving it on when it is not required could be a costly business and it’s this type of pointless usage the electricity monitor can help you save.

Standby Energy Savers. These devices can be purchased for about $30 and are a great way to save electricity. Most electrical devices have a standby mode that appears to switch the device off. The reality though is that standby mode for a TV for example can use up to seventy pc or more of the TV’s normal power consumption!

This is pricey as these items are frequently left at the ready 24 hours a day. An energy saver works by sitting between the mains plug and the offending machine. When you wish to power off the device you simply click on a button on a supplied radio control and the power is actually cut off. These devices are fantastic for equipment which has the electric socket in a position where it is impossible to get at to physically switch it off fit the device and the remote control does the rest. This can also be terribly reassuring when leaving the house for one or two days you know for sure that your electronic equipment is disconnected from the mains.

Each of the above devices have a cost up front that many aren't prepared to pay but when you consider the upward trend in energy costs is up just imagine the long term savings you might make by fitting these cheap devices.

Reducing the amount of electricity you use at home has never been more important than today. With electricity prices rising faster than inflation it’s time to take a look at some innovative ways to reduce your current Energy Consumption including switching to a cheaper supplier like the Utility Warehouse.

categories:

DIY Wind Generator – How To Get Rid Of Excess Power

November 15, 2011 by Paul Robertson  
Filed under Business

Many folks are unsurprisingly interested in the suggestion of tapping into free wind power by building a DIY wind generator. Before getting started with such a project it is worthwhile taking some time to learn the basic concepts of wind power before making up your mind about building a wind generator. It can be somewhat involved to run your appliances off the harvested electricity but the building of a generator is relatively easy.

Some individuals will likely find the wind power notion more attractive than the solar power alternative because windmill construction is quite straightforward. This could be due to the fact that windmills have been used for making flour and moving water for a very long time. Solar technology, on the other hand, is comparatively recent and uses a lot of obscure terms and materials.

The principal challenge with using air currents for home electricity, such as with a DIY wind generator, is that the air is irregular. The electricity produced can be stored in batteries just like solar energy, but when batteries are full they will burn out if the extra power is not diverted. A very windy day can push a lot of air through your system and might just make too much of a good thing.

This explains why the traditional windmill use of pumping H2O is comparatively easy – any excess water just flows away downstream. The blades can keep on turning and making the pump run and too much power and water is not a factor.

However, if you are using a DIY wind generator to create and store power, things get a bit more complicated. Installing switches for programmed operation of appliances is one beneficial way to plan ahead if you produce extra power that you can’t use. It is possible to establish the system so that a Telly or something similar will switch on, so that any further power coming into the batteries will go to that appliance. Instead, you can use a switch that automatically disconnects the generator from the batteries once they are entirely charged. Once the batteries have been automatically disconnected, the windmill blades can keep spinning around without causing any harm.

The point is not that it is impossible to use windy days to power your home, but that there is more to it than you may recognize. The most beneficial way to deal with this issue is to sell your unwanted power back to the power company. For the modest inconvenience of staying joined to the power grid, you will be able to create some spare income.

If you need some extra information on making a plan to get rid of spare power, you can simply find it on-line. The issue of extra power is one that can be simply dealt with if you are committed to making your own alternative energy and saving a bit of cash. When you take into account that you will be using electricity for many years to come, you will see that the slight effort of building a wind turbine will be repaid many times over.

You will definitely find that a DIY wind generator will provide a significant measure of your energy needs if you design it to suit your family’s requirements.

Before you purchase any plans for creating a DIY wind generator, make sure you grab a copy of Paul Robertson’s excellent FREE Report On DIY Energy Options, plus a load of other money-saving ideas.

categories:

What Makes a Good PA Electric Company

November 14, 2011 by Alexis Wright  
Filed under Business

PECO electric utility is unbiased and some would say agnostic about electric choice in Pennsylvania. The government of PA has broken up this large monopoly electric utility that primarily served the Philadelphia area. Now energy consumers can pick from multiple competitive electric providers in the state that offer cheaper electric rate plans compared to PECO.

Most of us in Philadelphia have decided to stay with PECO electric utility rather than shop electric companies like Spark Energy and Champion Energy. The residents of Philadelphia simply see the prospect of switching electric companies away from PECO as a hassle and the idea as foreign. PA residents simply do not have their questions adequately addressed as to what will change to make life more difficult for them if they choose to switch away from PECO electric company.

There has been a few notices that went out in the mail informing PECO electric utility customers that they can now choose an alternate electric company. Some competitive electricity suppliers competing against PECO have used this to persuade PECO energy customers to switch away. There have even been cases where the sales person has convinced the potential customer that they are PECO or were sent by PECO electric utility. This scam has helped some alternate energy suppliers to easily sign up new customers in the PECO footprint.

The main problem causing a headache for energy consumers in Pennsylvania are the misrepresentations made by some of the door to door sales guys hitting the streets. Many of these neighborhood canvas people will tell all kinds of half truths to get people to switch away from PECO Energy. When the customer gets their first months electric bill they feel as if they have been had. It is important that PA retail electric providers have some type of self policing and quality control to prevent the deregulation process from being tarnished.

In conclusion I would encourage Philadelphia energy consumers to not sign an energy contract with a door to door sales guy. It is worth listening to what they have to say but when they are finished talking go check out what they have told you on the internet. Read some government notices that have been published about PA electric deregulation and make an informed decision. Once you have a good grasp of electric deregulation and choice in PA go out to a comparison site and see what options are available in Pennsylvania on comparison websites.

PECO electric is the largest Pennsylvania electricity utility in the state. When comparing energy suppliers against PECO Electric it helps to review information on other electric providers and what has been said about them. You can learn more about electricity deregulation by reading these articles: Energy Articles

categories:

DIY Wind Power – A Great Way To Save A Lot Of Money

November 13, 2011 by Paul Robertson  
Filed under Business

If you are searching for an environmentally friendly way of cutting back on your energy bills, the DIY wind power presents as a highly worthwhile option. Constructing your own windmill can be a low-cost and simple project if you want to make important savings in energy expenditure. Basically, a wind turbine, or generator, is a system composed of fan blades attached to a hub, which turn a gear shaft that turns a generator that produces an electric charge.

The stored electrical energy can then be converted to alternating current suitable for home appliances. You can even draw directly from the storage batteries, or sell the stored energy back to the utility company. It is a good idea to use grid power as a backup system if the wind speeds in your area are temporarily too low to produce enough power.

It will likely cost you a few hundred dollars to build a DIY wind power turbine, and this may seem like quite a lot. Nevertheless over the life of your windmill you will save many times this amount by making your electricity. Many homeowners, especially those with farms or large open spaces on their properties, have seen huge savings and even profits with their own turbines.

Finding a good guide on how to build your own wind turbine is the key foundation to your diy project. You can very easily find good quality guides on the internet that will take you through the necessary step for creating your own generator. When you are comparing guides, make sure you get one that is easy to read and contains comprehensive constructions. The guide should tell you what you need to buy and how to assemble the parts, as well as give tips on location and tying it in to your home’s electrical system.

It is important to find a good location for your DIY wind power generator. You want it to be in an open space without blockages. For example, if you build it on its own tower, make sure it is a reasonable distance from the house. See if you can discover any guides on local wind directions and speeds to help you find the best location for your windmill

Once you have found the right location, you are ready to acquire the parts and assemble the turbine. Have a look at online auction sites and specialised turbine stores – these can be really good for getting good materials at an affordable price. Make sure that you have all of the parts before you begin, and consult your guide regularly.

When you have finished assembling your DIY wind power turbine, it can be placed on a tower or pole in the ideal location. You then run a power line to the house – the best place to connect is where the standard grid connection is. Using the appropriate gauge and type of wire is very important when you are doing the electrics.

The final step is to connect it to your home’s electrical system, and to batteries should you wish to store electricity. When undertaking this step, it is a good idea to use an electrician unless you are experienced with such systems and the best way to connect them. Make sure your electricity is turned off at the meter when you connect your turbine to your home’s electrical system.

You can clearly see that DIY wind power is a fantastic way to save a lot of money. Building your own turbine can be inexpensive and undemanding. Harnessing the wind can yield savings and even profits that more than make up for the upfront cost of constructing and installing your own DIY wind power turbine.

Before you make a decision on which DIY Wind Power project to make, make sure you have a look at Paul Robertson’s FREE Report on DIY Energy Options plus other money saving secrets for your home.

categories:

DIY Magnetic Energy – Some Useful Information

November 12, 2011 by Paul Robertson  
Filed under Business

DIY magnetic energy helps lower utility bills to make energy in the home more effective by creating a magnetic power generator. The utility bill will be significantly lowered or eliminated totally if the generator is built large enough to furnish the power.

Individuals who have this type of generator in the home do not have a utility bill because the generator supplies all the power. A DIY magnetic generator is a useful way to get some freedom from the hold of the power companies. It is also a good idea to have a look at your current use of electrical equipment to determine if there are any opportunities for saving power.

A couple of options here are to use fluorescent bulbs and switch off unused equipment. Another great way to reduce power usage is to be more prudent with airconditioning and heating, as well as your utilisation of the clothes drier. Dishes can also be washed and dried naturally without using the dishwasher. Shut the air vents in rooms you don’t use and make sure that your air filters are changed and cleaned regularly. Some other good tips to cut back on power usage are to repair leaking taps, swap ageing appliances with energy efficient ones, and use cold water for washing clothes where achievable.

Once you have done all you can with energy conservation, you can get to work with constructing a diy magnetic energy generator for your home. You can make a permanent one by putting magnets on the outside of a wheel – their opposing fields cause the wheel to revolve.

After you have managed to get the wheel turning, you can hook it up to a DC generator. By doing this you the kinetic energy of the spinning wheel is converted into electricity. The electricity you have created can be stored in a battery pack until you are all set to use it around your dwelling.

More and more people are aware that diy magnetic energy generators are a reliable source of power that provides free electricity. It is actually straightforward to understand how one works. Unlike some other renewable power sources, it produces electricity as soon as you get it started. Its 3 key advantages are that is doesn’t produce excess heat, it is environmentally benign, and it is a clean power source.

DIY magnetic generators also don’t take up a lot of room. They will work in just about any climate and cost very little to put together. It typically cost less than $100 to tap into diy magnetic energy and will save even more when the electrical bill is eliminated. Thus many individuals are making and using this device.

However, keep in mind that accidents do happen when making this device because of negligence. To preclude accidents with turning machinery it is advisable to use gloves and safety glasses. DIY magnetic energy differs in content and nature, depending on the individual who is building it. It is recommended that you build a system which is appropriate to your family and household needs. If the generator is too weak, it will not support he power needs of the entire household. Creating a larger device and/or using more magnets will make sure that you have a diy magnetic energy system that will bring a significant benefit to your home and family.

Before you make a decision on DIY magnetic energy solutions, check out Paul Robertson’s excellent FREE report on DIY Energy Options and other money saving secrets for your home.

categories:

Top Six Reasons to Spring For Window Tinting on Your Car

October 18, 2011 by Xander Boyde  
Filed under Business

Window tinting has as much to do with performance and protection as it does with the actual look and style of your vehicle. The process of tinting windows used to be reserved primarily for government and luxury vehicles due to cost but simplifications in the process of window tinting have brought into the mainstream. Most new vehicles now come with some level of window tinting and just about any vehicle can have additional tint added.

There are numerous reasons to enhance the tinting on a vehicle ranging from health concerns, comfort, safety, privacy, etc. Likewise, adding the right level of tinting film to your vehicle can help preserve your investment in a vehicle. Of course going beyond protective measures, tint adds a lot of style to stock vehicle that’s hard to match. Here are 6 reasons to invest in window tint for your car, truck or SUV.

Avoid Overheating – The sun can increase the temperature inside your vehicle by more than 20 degrees on a hot day, and that change can happen in a matter of minutes. Properly applied tint can keep the interior of your car up to 60% cooler on hot summer days by acting as a radiant barrier.

Protecting your Body – UV radiation can be very bad for you in excessive amounts. It has been known to contribute if not outright cause sun burns, cancer, wrinkles, cataracts, ocular degeneration and blotches on the skin. By adding the proper tinting to your windows you can reduce the levels of UV exposure by as much as 99%

Accident Protection – Tinting is applied to windows in a film, and in an accident that film can act as a binding agent that holds shattered glass together. It won’t prevent a window from breaking completely but it could reduce the spray of shattered glass into a vehicle.

Enhancing Privacy – Thieves generally don’t steal what they can’t see. When you install a deeper tint on your windows it helps protect the contents of your vehicle by preventing would be thieves from seeing that there is anything there to steal.

Prolonging Vehicle Life – Those UV rays aren’t just harmful to you – they cause your upholstery to crack and fade over time. Car tint acts like a great sunscreen for your vehicle, protecting the internal surfaces from sun damage.

Safer Driving – Glare can happen for a good many reasons. Whether it’s the sun, oncoming headlights or other bright light sources adding a properly rated antiglare tint to your windshield and other windows in your vehicle can greatly increase the safety of you and your passengers.

Whatever the reason you choose, you can save a great deal of money by investing in window tinting for your vehicle. The cost will vary depending on the number of windows you have, the size of your windows, etc. but even for a larger vehicle it’s a sound investment that will pay you back in the end.

Boost the comfort and style of your car with window window tinting va. window tinting virginia is the only functional upgrade you can make to a ride that is not just visually appealing but works to keep your car cool. Click to learn how you can easily and affordably upgrade your vehicle.

categories: